New Golf Cars
  Transport &
 
Shuttle Vehicles
  Workhorse
  Refreshment
 
Vehicles
  Industrial &
 
Utility Vehicles
  Used Vehicles
  Accessories
  Parts & Service
  About Us
  Contact Us
  Locations
  Home


EZ-GO Industrial 875E & 800G


EZ-GO Industrial 875E

STANDARD EQUIPMENT:
 
Motor: 36 volt DC, high efficiency series wound, brazed armature, solid copper windings.
Vented 2.5 HP @ 2700 RPM (continuous duty).
Drive Train: Direct motor shaft connected to transaxle pinion shaft.
Transaxle: High efficiency differential with helical gears, 14.78:1 ratio.
Brakes: Hydraulic, drum type, dual rear wheel brakes. Hand ratcheted parking brake. Non-asbestos lining.
Electrical System: 36 volt DC, six, 6 volt heavy duty, deep cycle storage batteries (107 minute, 220 amp-hour @ 20 Hr. discharge rate).
Speed Control: Solid State HDI Controller, 400 amp rated.
Charger: Powerwise™ on board fully automatic line compensating, 21 amp DC output at 36 volts; input 110 -120 volts, 9.5 amps, 60 cycle AC, Underwriters Laboratories (U.L.) Listed, C.S.A. Certified, anti drive away charger/vehicle interlock.
Steering: Double reduction rack and pinion.
Front Suspension: Heavy duty multiple leaf springs with hydraulic shock absorbers.
Rear Suspension: Heavy duty multiple leaf springs with hydraulic shock absorbers.
Seating: Vacuum formed fabric backed vinyl covers over thick cushion foam. Individual seat bottoms and bench seat back. Seating for two occupants.
Speed: 12 -14 MPH (Unloaded)
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
 
Weight: 995 lbs., without batteries
Length: 116” inches
Width: 44.5 inches
Height: 45 inches (at steering wheel)
Floor Height: 13.75 inches
Cargo Deck Height: 26.0 inches (27.2 inches to top of frame)
Cargo Deck Size: 44.50 inches wide, 69 inches long
Ground Clearance: 5 inches (at differential)
Seat Height: 29.8 inches
Wheel Base: 56.0 inches
Turning Clearance Diameter: 20’11” feet
Intersection Aisle Clearance: 84” inches
Tires: 5.70 x 8 (6 ply rated) USA Trail, Load Range C
Load Capacity: 3,000 lbs. (including operator, passenger, accessories and cargo)
___________________________________________________________________________________________
FEATURES:
 
1. Cargo Deck: Glass filled composite plastic deck hinged for access to drive package and storage area.
2. Chassis: Welded high yield strength tubular steel.
3. Body: Heavy duty four-way diamond pattern body panels.
4. Finish: Modified acrylic topcoat over polyester primer (Industrial Yellow).
5. Safety: Removable switch key, electric horn, reverse warning indicator, "deadman" accelerator control, handgrip and hip restraint, manual F & R switch with "neutral".
6. Steering Wheel: Molded high impact plastic with dual handgrips, pencil holder, and a convenient clipboard.
7. Lighting Package: Dual Halogen headlights, taillights, and brake lights.
8. Internal Storage: 44.25" W x 12" L x 14" H (Located under hinged plywood deck board).
9. Underwriters Laboratories (U.L.): Approved Type "E" classification.
 

INDUSTRIAL 875G

STANDARD EQUIPMENT: (4 Cycle)
 
Engine: 11 H.P. rated, 4 cycle, 350 cc twin cylinder, air cooled
Valve train: Overhead valve, overhead cam.
Lubrication: Pressurized oil system, washable permanent filter, wet sump.
Balancer: Internal counter rotating balance shaft.
Ignition: Solid state with crank trigger and electronic timing advance.
Carburetor: Fixed jet float bowl with separate fuel pump.
Air Cleaner: Replaceable dry cartridge.
Electrical System: External starter/generator, 12 volt maintenance free battery, 360 CCA, 51 minute reserve.
Drive Train: Automatic, continuously variable transmission (CVT) forward and reverse.
Transaxle: High efficiency differential with helical gears, 13.32:1 ratio, ground speed governor.
Brakes: Dual rear wheel, hydraulic drum brakes with non-asbestos linings. Hand ratcheted parking brake.
Front Suspension: Multiple leaf springs with hydraulic shock absorbers.
Rear Suspension: Multiple leaf springs with hydraulic shock absorbers.
Steering: Double reduction rack and pinion.
Fuel System: 6.5 gallon tank with instrument panel mounted fuel gauge.
Seating: Fabric backed vinyl covers over thick cushion foam individual seat bottoms and bench seat back. Seating
for two occupants.
Speed: Automatically governed to 15 MPH on level ground (unloaded).
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
 
Weight: 1,036 lbs. dry (fuel capacity 40 lbs.)
Length: 116 inches (123 inches with optional rear foot rest)
Width: 44.5 inches (at rear wheels)
Height: 45 inches (at steering wheel)
Floor Height: 13.75 inches
Cargo Deck Height: 26.0 inches (27.2 inches to top of frame)
Cargo Deck Size: 44.5 inches wide, 69 inches long
Ground Clearance: 5 inches (at differential)
Seat Height: 29.8 inches
Wheel Base: 56.0 inches
Turning Clearance Diameter: 20’ 11”
Intersection Aisle Clearance: 84”
Tires: 5.70 x 8, USA Trail, Load Range C
Load Capacity: 1,600 lbs. (including operator, passenger, cargo and accessories)
____________________________________________________________________________________________
FEATURES:
 
1. Cargo Deck: Glass filled composite plastic deck hinged for access to drive package.
2. Chassis: Welded high yield strength tubular steel.
3. Body: Heavy duty four-way diamond pattern body panels.
4. Finish: Modified acrylic topcoat over polyester primer (Industrial Yellow).
5. Safety: Removable switch key, electric horn, reverse warning indicator, "deadman" accelerator control, handgrip
and hip restraint, manual F & R switch.
6. Steering Wheel: Molded high impact plastic with dual handgrips, pencil holder, and a convenient clipboard.
7. Lighting Package: Dual Halogen headlights, taillights, and brake lights.
8. Internal Storage: 44.25” W X 12” L X 14”H (Located under hinged plywood deck panel)
9. Low oil pressure indicator light
10. Analog fuel level gauge
Base Part Number: 34300G01
2002 INDUSTRIAL
 
 
 

 
Call us Toll Free at: 1-800-345-9665
or contact one of our locations below:
 

Alberta
#8 190th Avenue SE Calgary, AB
(mailing address) Site 11, Box 21, RR9 Calgary, AB T2J 5G5
Phone:  403-254-6304 or 403-668-7351
Fax# 403-254-6305

( Click Here for Map of Location )

Click here to contact Dan McLean at the Alberta Location

British Columbia
3097-230 Street Langley, BC V2Z 3A9

Phone:    604-533-7911
Fax:         694-533-7915

( Click Here for Map of Location

Click here to contact John Dunn at the BC Location