|
|
E-Z-GO INDUSTRIAL 800E & 800G
| |
|
 |
|
|
E-Z-GO
INDUSTRIAL 800E |
STANDARD
EQUIPMENT:
Motor: Heavy Duty 36 volt DC high efficiency series wound,
brazed armature, solid copper windings
Non vented 2.5 HP @ 2700 RPM (one hour).
Drive Train: Direct motor shaft connected to transaxle pinion
shaft.
Transaxle: High efficiency differential with helical gears,
14.78 ratio.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting
with non-asbestos linings. Automatic park brake
release with self-compensating system.
Electrical System: 36 volt DC, six, 6 volt heavy duty, deep
cycle storage batteries (107 minute, 220 amp-hour @ 20
Hr. discharge rate). State of charge meter.
Accelerator Switch: Solid State Controller, 300 amp rated.
Charger: Fully automatic line compensating, 21 amp DC output at
36 volts: input 110-120 volts, 10.25 amps, 60
cycle AC, Underwriters Laboratories (U.L.) Listed, Powerwise®
Onboard Std Industrial.
Front Suspension: Heavy duty multiple leaf springs with
hydraulic shock absorbers.
Rear Suspension: Heavy duty multiple leaf springs with
hydraulic shock absorbers.
Steering: Double reduction rack and pinion.
Speed: 12 - 14 MPH (19 - 23 KPH)
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
Weight:675 lbs without batteries
Length: 103 inches(2.6m)
Width: 46.5 inches (1.18m)
Height: 48.6 inches (1.23m) (top of steering wheel)
Wheel Base: 65.5 inches (1.66m)
Front Wheel Tread: 33.5 inches(0.85m)
Rear Wheel Tread: 38.0 inches(0.97m)
Turning Clearance Diameter: 18.9 feet(5.72m)
Tires: 5.70 x 8 4 ply USA Trail
Load Capacity: 800 lbs. (362kg) including operator, passenger,
accessories and cargo. 500 lb. bed max.
Load Bed Size: 46 inches wide, 35 inches long, 10 inches deep
(117cm x 89cm x 25cm)
Seating: Vacuum formed fabric backed vinyl covers over thick
cushion foam. Standard seating for operator and one
passenger.
____________________________________________________________________________________________
FEATURES:
Body & Finish: Heavy duty 4-way diamond pattern. Body panels
modified acrylic topcoat over polyester
primer (industrial yellow).
Cargo bed: Heavy duty bed liner with tailgate cover. Quick
release for easy service access. Hinged,
removable tailgate, removable bed sides.
Chassis: Welded high yield strength tubular steel with
Durashield powder coat paint.
Safety: Dash mounted key switch, reverse warning indicator,
“deadman” accelerator control,
Dash Panel: Tee, ball, and 4 position drink holders of scuff
resistant glass fiber reinforced
Steering Wheel: Hi-tech design with dual handgrips, pencil
holder, integral scorecard holder.
Lighting Package: Headlights, tail lights, and brake lights. |
|
|
E-Z-GO
INDUSTRIAL 800G |
STANDARD
EQUIPMENT:
Motor: Heavy Duty 36 volt DC high efficiency series wound,
brazed armature, solid copper windings
Non vented 2.5 HP @ 2700 RPM (one hour).
Drive Train: Direct motor shaft connected to transaxle pinion
shaft.
Transaxle: High efficiency differential with helical gears,
14.78 ratio.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting
with non-asbestos linings. Automatic park brake
release with self-compensating system.
Electrical System: 36 volt DC, six, 6 volt heavy duty, deep
cycle storage batteries (107 minute, 220 amp-hour @ 20
Hr. discharge rate). State of charge meter.
Accelerator Switch: Solid State Controller, 300 amp rated.
Charger: Fully automatic line compensating, 21 amp DC output at
36 volts: input 110-120 volts, 10.25 amps, 60
cycle AC, Underwriters Laboratories (U.L.) Listed, Powerwise®
Onboard Std Industrial.
Front Suspension: Heavy duty multiple leaf springs with
hydraulic shock absorbers.
Rear Suspension: Heavy duty multiple leaf springs with
hydraulic shock absorbers.
Steering: Double reduction rack and pinion.
Speed: 12 - 14 MPH (19 - 23 KPH)
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
Weight:675 lbs without batteries
Length: 103 inches(2.6m)
Width: 46.5 inches (1.18m)
Height: 48.6 inches (1.23m) (top of steering wheel)
Wheel Base: 65.5 inches (1.66m)
Front Wheel Tread: 33.5 inches(0.85m)
Rear Wheel Tread: 38.0 inches(0.97m)
Turning Clearance Diameter: 18.9 feet(5.72m)
Tires: 5.70 x 8 4 ply USA Trail
Load Capacity: 800 lbs. (362kg) including operator, passenger,
accessories and cargo. 500 lb. bed max.
Load Bed Size: 46 inches wide, 35 inches long, 10 inches deep
(117cm x 89cm x 25cm)
Seating: Vacuum formed fabric backed vinyl covers over thick
cushion foam. Standard seating for operator and one
passenger.
____________________________________________________________________________________________
FEATURES:
Body & Finish: Heavy duty 4-way diamond pattern. Body panels
modified acrylic topcoat over polyester
primer (industrial yellow).
Cargo bed: Heavy duty bed liner with tailgate cover. Quick
release for easy service access. Hinged,
removable tailgate, removable bed sides.
Chassis: Welded high yield strength tubular steel with
Durashield powder coat paint.
Safety: Dash mounted key switch, reverse warning indicator,
“deadman” accelerator control,
Dash Panel: Tee, ball, and 4 position drink holders of scuff
resistant glass fiber reinforced
Steering Wheel: Hi-tech design with dual handgrips, pencil
holder, integral scorecard holder.
Lighting Package: Headlights, tail lights, and brake lights.
|
|
|
|
