|
|
EZ GO Industrial 640 & 835
|
 |
|
|
EZ GO
Industrial 640 |
STANDARD
EQUIPMENT:
Motor: Heavy Duty 24 volt DC, high efficiency series wound,
brazed armature, solid copper windings.
1.5 H.P. at 2800 R.P.M. and 4.3 H.P. at 1200 R.P.M.
Drive Train: Direct motor shaft connected to transaxle pinion
shaft.
Transaxle: High efficiency differential with helical gears,
14.78:1 ratio.
Brakes: Mechanical drum type, dual rear wheel brakes. Automatic
parking brake.
Electrical System: 24 volt DC, four, 6 volt heavy duty, deep
cycle storage batteries (107 minute, 220 amp-hour @
20 Hr. discharge rate).
Accelerator Switch: Solid state LDI controller.
Charger: Fully automatic line compensating, 21 amp DC output at
24 volts: input 110-120 volts, 6.5 amps, 60 cycle
AC, Underwriters Laboratories (U.L.) Recognized, On-Board Total
Charge® III, CSA Certified.
Steering: Direct linkage from front wheel to steering wheel.
Speed: 9 MP
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
Weight: 490 lbs., without batteries
Length: 84 inches
Width: 29.5 inches (at rear wheels)
Height: 48.0 inches (without ladder), 77.8 inches (with 4 step
ladder)
Floor Height: 5 inches
Cargo Deck Height: 21.5 inches (22.5 inches to top of frame)
Ground Clearance: 4 inches (at differential)
Wheel Base: 48 inches
Turning Clearance Diameter: 10.5 feet
Intersection Aisle Clearance: 56 inches
Tires: 4.80 x 8 industrial tires, front and rear
Load Capacity: 1,000 lbs. (including operator, accessories and
cargo)
Cargo Deck Size: 29 inches wide, 48 inches long
____________________________________________________________________________________________
FEATURES:
1. Cargo Deck: Removable for access to drive package.
2. Chassis: Welded high yield strength tubular steel.
3. Body: Heavy duty four-way diamond pattern body panels.
4. Finish: Modified acrylic topcoat over polyester primer
(Industrial Yellow).
5. Safety: Removable switch key, electric horn, reverse warning
indicator, "deadman" accelerator control with
automatic parking brake, manual F & R switch with "neutral".
6. Steering Wheel: Molded high impact design with dual
handgrips.
7. Underwriters Laboratories (U.L.): Approved Type “E”
classification.
____________________________________________________________________________________________
OPTIONS:
Non-Standard Paint Color
Lift-Out Battery Tray
145 Min., 250 Amp-Hr. Batteries
Forward Motion Indicator
Headlight and Taillights
Beacon Light
U.L. Approved “EE” classification
Hour Meter
State of Charge Meter (LED)
4.80 x 8 USA Trail, Foam Filled Tires
21 Amp Portable Total Charge® IV Charger, U.L.
Listed, CSA Certified
21 Amp Portable Total Charge® III Charger, U.L.
Listed, CSA Certified |
|
|
EZGO
Industrial 835 |
STANDARD
EQUIPMENT:
Motor: Heavy Duty 24 volt DC high efficiency series wound,
brazed armature, solid copper windings.
1.5 H.P. at 2800 R.P.M. and 4.3 H.P. at 1200 R.P.M.
Drive Train: Direct motor shaft connected to transaxle pinion
shaft.
Transaxle: High efficiency differential with helical gears,
14.78:1 ratio.
Brakes: Self-adjusting, dual rear wheel drum type with
non-asbestos linings. Separate hand operated parking
brake.
Electrical System: 24 volt DC, four, 6 volt heavy duty, deep
cycle storage batteries (107 minute, 220 amp-hour @
20 Hr. discharge rate).
Accelerator Switch: Solid State LDI Controller.
Charger: Fully automatic line compensating, 21 amp DC output at
24 volts: input 110-120 volts, 6.5 amps, 60 cycle
AC, Underwriters Laboratories (U.L.) Recognized, On-Board Total
Charge® III, CSA Certified.
Front Suspension: .75 inch diameter solid axle
Rear Suspension: Heavy duty coil springs with hydraulic shock
absorbers.
Steering: Double reduction rack and pinion.
Seating: Vacuum formed fabric backed vinyl covers over thick
cushion foam. Bench seat and seat back, with fold
down rear seat. Seating for one or two occupants.
Speed: 10 MPH
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
Weight: 510 lbs., without batteries
Length: 73.5 inches without footrest (85.6 with footrest)
Width: 29.5 inches
Height: 42.5 inches (at steering wheel))
Floor Height: 7.5 inches to top of floor
Cargo Deck Height: 21.0 inches (22.7 inches to top of frame)
Ground Clearance: 4 inches (at differential)
Seat Height: 24.25 inches
Wheel Base: 52 inches
Outside Turning Clearance Diameter: 13.5 feet
Inside Turning Clearance Diameter: 5.5 ft.
Intersection Aisle Clearance: 58 inches
Tires: 4.80 x 8 industrial tires
Load Capacity: 550 lbs. (including operator, passenger,
accessories and cargo)
Cargo Deck Size: 29.25 inches wide, 20.25 inches long
____________________________________________________________________________________________
FEATURES:
1. Cargo Deck: Hinged for access to drive package.
2. Chassis: Welded high yield strength tubular steel.
3. Body: Bolt-on heavy duty diamond pattern body panels.
4. Finish: Modified acrylic topcoat over polyester primer
(Industrial Yellow).
5. Body Protection: Steel side rub rails with integral front
bumper.
6. Safety: Removable switch key, electric horn, reverse warning
indicator, "deadman" accelerator control, handgrip
and hip restraint, manual F & R switch with "neutral".
7. Steering Wheel: Molded high impact plastic with dual
handgrips, pencil holder, and a convenient clipboard.
8. Fold Down Rear Seat: Standard.
9. Lighting Package: Rear brake light.
10. Underwriters Laboratories (U.L.): Approved Type "E"
classification. |
|
|
|
