|
STANDARD
EQUIPMENT:
Engine: 9.0 HP (6.7 KW) rated, 4 cycle, 18 ci (295 cc) twin
cylinder, air cooled, by Robin USA.
Valve train: Overhead valve, overhead cam with belt drive.
Lubrication: Pressurized oil system, washable permanent filter.
Dash mounted low oil pressure indicator.
Balancer: Internal counter rotating balance shaft.
Ignition: Solid state with crank trigger, electronic timing
advance and RPM limiter.
Carburetor: Fixed jet float bowl with remote pulse fuel pump.
Air Cleaner: Engine mounted integral air intake system with
multi-phase silencer and washable cartridge
filter element.
Electrical: Starter/generator, solid state regulator, 12 volt
maintenance free battery, 430 CCA, 60 minute reserve.
Drive Train: Automatic, continuously variable transmission (CVT).
Transaxle: High efficiency helical gears, 13.32:1 ratio, ground
speed governor, forward/reverse with neutral lock.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting
with non-asbestos linings. Automatic park brake
release with self-compensating system.
Front Suspension: Leaf springs with hydraulic shock absorbers.
Rear Suspension: Leaf springs with hydraulic shock absorbers.
Steering: Self-compensating single reduction rack and pinion.
Fuel System: 6 gallon (22.8 l) tank with dash mounted analog
fuel gauge.
Speed: Automatically governed to 12-14 MPH (19-23 KPH) on level
ground.
Lighting: Headlights, taillights, brake lights and horn.
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
Weight: 679 lbs. (308 KG) dry
Length: 92.6 inches (2.35m)
Width: 46.5 inches (1.18m)
Height: 48.6 inches (1.23m) at steering wheel
Wheel Base: 65.5 inches (1.66m)
Front Wheel Tread: 33.5 inches (0.85m)
Rear Wheel Tread: 38.0 inches (0.97m)
Clearance Circle: 18.9 feet (5.72m)
Tires: 18 x 8.50 x 8 (4 ply rated)
Load Capacity: 800 lbs. (362 KG) including operator,
passengers, accessories, and cargo.
Seating: Vacuum formed fabric backed vinyl covers over thick
cushion foam. Standard seating for operator and one
passenger.
____________________________________________________________________________________________
FEATURES:
1. Body & Finish: Durashield ™ body of automotive quality
injection molded TPE (thermoplastic elastomer).
Molded-in color with automotive color coat/clear coat finish.
2. Chassis: Welded high yield strength tubular steel with
Durashield™ powder coat paint.
3. Safety: Dash mounted key switch, reverse warning indicator,
"deadman" accelerator control, integral handgrip
on hip restraints, manual forward/reverse selector.
4. Dash Panel: Tee, ball, and 4 position drink holders of scuff
resistant glass fiber reinforced thermoplastic olefin.
5. Steering Wheel: Hi-tech design with dual handgrips, pencil
holder, integral scorecard holder. |
