|
STANDARD
EQUIPMENT:
Motor: 36 volt DC high efficiency series wound, brazed
armature, solid copper windings.
Drive Train: Direct motor shaft connected to transaxle pinion
shaft.
Electrical System: 36 volt DC, six, 6 volt deep cycle storage
batteries (107 minute, 220 amp-hour @ 20 Hr.
discharge rate). Dash mounted electronic “state of charge”
meter.
Speed Control: Solid state continuously variable speed
controller. 300 Amp capacity, Non-contact inductive throttle
sensor.
Charger: Powerwise™ portable fully automatic line compensating,
21 amp DC output at 36 volts; input 120 volts,
9.5 amps, 60 cycle AC, Underwriters Laboratories (U.L.) Listed,
C.S.A. Certified, anti drive away charger/vehicle
interlock.
Transaxle: High efficiency helical gears, 12.44:1 ratio.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting
with non-asbestos linings. Automatic park brake
release with self-compensating system.
Front Suspension: Leaf springs with hydraulic shock absorbers.
Rear Suspension: Leaf springs with hydraulic shock absorbers.
Steering: Self-compensating single reduction rack and pinion.
Speed: 12 - 14 MPH (19 - 23 KPH)
Lighting: Headlights, taillights, brake lights and horn.
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
Weight: 560 lbs. (254 KG), without batteries
Length: 92.6 inches (2.35m)
Width: 46.5 inches (1.18m)
Height: 48.6 inches (1.23m) at steering wheel
Wheel Base: 65.5 inches (1.66m)
Front Wheel Tread: 33.5 inches (0.85m)
Rear Wheel Tread: 38.0 inches (0.97m)
Clearance Circle: 18.9 feet (5.72m)
Tires: 18 x 8.50 x 8 (4 ply rated)
Load Capacity: 800 lbs. (362 KG) including operator,
passengers, accessories and cargo.
Seating: Vacuum formed fabric backed vinyl covers over thick
cushion foam. Standard seating for operator and one
passenger.
____________________________________________________________________________________________
FEATURES:
1. Body & Finish: Durashield™ body of automotive quality
injection molded TPE (thermoplastic elastomer).
Molded-in color with automotive color coat/clear coat finish.
2. Chassis: Welded high yield strength tubular steel with
Durashield™ powder coat paint.
3. Safety: Dash mounted key switch, reverse warning indicator,
"deadman" accelerator control, integral handgrip
on hip restraints, manual forward/reverse selector with
"neutral".
4. Dash Panel: Tee, ball, and 4 position drink holders of scuff
resistant glass fiber reinforced thermoplastic olefin.
5. Steering Wheel: Hi-tech design with dual handgrips, pencil
holder, integral scorecard holder. |
