|
|
E-Z-GO WORKHORSE
1000E
|
 |
|
|
E-Z-GO
WORKHORSE 1000E |
STANDARD
EQUIPMENT:
Motor: 36 volt DC high efficiency series wound, brazed
armature, solid copper windings. Non vented 2.5 HP @ 2700
RPM (one hour).
Drive Train: Direct motor shaft connected to transaxle pinion
shaft.
Transaxle: High efficiency differential with helical gears,
12.44:1 ratio, “Synergy” synthetic lubricant.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting
with non-asbestos linings. Automatic park brake
release with self-compensating system.
Electrical System: 36 volt DC, six, 6 volt deep cycle heavy
duty storage batteries (107 minute, 220 amp-hour @ 20
Hr. discharge rate).
Accelerator Switch: Solid State HDI Controller, 400 amp rated.
Charger: Powerwise™ portable fully automatic line compensating,
21 amp DC output at 36 volts; input 120 volts,
9.5 amps, 60 cycle AC, Underwriters Laboratories (U.L.) Listed,
C.S.A. Certified, anti drive away charger/vehicle
interlock.
Front Suspension: Heavy duty multiple leaf springs with
hydraulic shock absorbers.
Rear Suspension: Heavy duty multiple leaf springs with
hydraulic shock absorbers.
Steering: Self compensating single reduction rack & pinion.
Seating: Vacuum formed fabric back vinyl covers over thick
cushion foam. Standard seating for operator and one
passenger.
Speed: 12 - 14 MPH
____________________________________________________________________________________________
DIMENSIONAL SPECIFICATIONS:
Weight: 824 lbs., without batteries
Length: 110.5”
Width: 48 inches (at bed)
Height: 45.5 inches (at steering wheel)
Floor Height: 10 inches
Load Bed Height: 25 inches
Ground Clearance: 4.3 inches (at differential)
Seat Height: 26 inches
Wheel Base: 77 inches
Front Wheel Tread: 33.5 inches
Rear Wheel Tread: 38 inches
Turning Clearance Diameter: 21.0 feet
Tires: 18 x 8.50 x 8 (4 ply rated)
Load Capacity: 1,000 lbs. (including operator, passenger,
accessories and cargo) 600 lb. max. bed load.
Load Bed Size: 48 inches wide, 40 inches long, 12 inches deep
Load Bed Capacity: 13.3 cubic feet (.49 cubic yard)
____________________________________________________________________________________________
FEATURES:
1. Load Bed: Tilts for complete access to drive package.
Removable sides and tailgate.
2. Chassis: Welded high yield strength tubular steel.
3. Body: Front : Durashield ™ of automotive quality injection
molded TPE (thermoplastic elastomer). Molded in
color with automotive color coat / clear coat finish.
Rear : Steel, replaceable lightweight panels.
4. Finish: Durashield ™ powder primer and topcoat.
5. Body Protection: Flexible rear fenders and flexible front
cowl . Bed and tailgate liner.
6. Safety: Removable key switch, reverse warning indicator, "deadman"
accelerator control, vinyl handgrip and hip
restraints, manual F & R switch, and electric horn.
7. Center Console: Instrument panel with four drink holders.
8. Steering Wheel: Molded high impact plastic with dual
handgrips, pencil holder, and a convenient
clipboard. |
| |
|
|
|
